Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Windshield Wiper Blade on the Toyota Alphard Vellfire

Model: Toyota Alphard Vellfire MK 3 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Windshield wipers

See other generations:
Video tutorial

If you notice that the rubber on the rear windshield wiper blade is worn or cut, it’s time to replace it. Follow these instructions: on this vehicle, the rear wiper is hinged at the top of the hatch under the spoiler. To remove it, you need a 10mm wrench to loosen the nut securing the central pivot.

If you only want to replace the blade without the arm, set the wiper control lever on the dashboard to the intermediate position so that the wiper arm stops vertically. At that point, you can detach the blade by pulling it towards you. Finally, take the new blade and reposition it on the hook.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
Toyota Alphard Vellfire (2015-2023 / MK 3) In this brief guide, follow the main steps to remove and replace the serpentine belt on the Toyota Alphard Vellfire 3.5L. First, lift the vehicle and…
How to Remove the Middle Seats of the Toyota Alphard Vellfire
How to Remove the Middle Seats of the Toyota Alphard Vellfire
Toyota Alphard Vellfire (2015-2023 / MK 3) In today's tutorial video, you will learn how to disassemble the middle seats of the Toyota Alphard Vellfire in simple and quick steps. First, open t…
Guide to Replacing the Serpentine Belt Tensioner on the Toyota Alphard Vellfire 3.5L V6
Guide to Replacing the Serpentine Belt Tensioner on the Toyota Alphard Vellfire 3.5L V6
Toyota Alphard Vellfire (2015-2023 / MK 3) In this brief and simple guide, follow the main instructions to remove and replace the serpentine belt tensioner on the Toyota Alphard Vellfire 3.5L …

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos