Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Tire pressure warning light

The button to reset the tyre pressure warning light on the Toyota Aygo is located inside the glove compartment. Once opened, you should be able to locate the button by looking up to the left, next to the passenger airbag deactivation system. You can immediately recognise the button as it bears the same symbol as the warning light you want to reset. To perform the reset, simply turn on the ignition and hold the aforementioned button until the tyre pressure warning light first flashes and then disappears.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on a Toyota Aygo?
How to reset the tire pressure warning light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tire pressure light on a Toyota Aygo, start by locating the reset button, which is found in the front passenger side glove box. Turn on …
Resetting the tire pressure warning light on the Toyota Aygo
Resetting the tire pressure warning light on the Toyota Aygo
Toyota Aygo (2021-2026 / MK 3, Aygo X) The activation of the tire pressure warning light indicates a possible puncture in one or more tires; let's see how to reset the TPMS sensors on the …
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos