Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris Cross
    4. : How to reset the Toyota Yaris Cross Hybrid service light

Toyota Yaris Cross - Video tutorial

Model: Toyota Yaris Cross MK 1 - Years 2020-2024
Part: Instrument cluster
Operation: How to reset the Toyota Yaris Cross Hybrid service light

If you own a Toyota Yaris Cross Hybrid and want to find out how to manually reset the service warning light that comes on on the instrument panel, just read the following mini guide carefully. You obviously need to start the framework first if you haven't done so before. Then press the Menu button located on the left side of the steering wheel and navigate through it until you find the "Vehicle Settings" item. Select the latter and immediately after enter "Oil Maintenance". Finally, confirm the reset of the light and a few seconds later you're done.


Posted on 26 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Yaris Cross 2020-2027 - What does the orange oil light on Toyota Yaris Cross mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos