Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Internal Fuse Box in the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

In today's video tutorial, we will see the location of the internal fuse box and how to find the fuse diagram for the Toyota Yaris. First, get into the vehicle from the front passenger side and start removing the glove compartment by unscrewing the screws; then remove the plastic cover found at the bottom to access the internal fuse box, as shown in the video.

At this point, find the diagram on the small plastic cover or in the owner's manual; to remove the fuse box, unscrew its screws and disconnect all electrical wiring!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Fuses Location and Diagram for the Toyota Yaris
Fuses Location and Diagram for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this guide, we will look at the location and diagram of the fuses for the Toyota Yaris, following the instructions below. First, get inside the ve…
Fuse Positioning and Diagram for the Toyota Yaris
Fuse Positioning and Diagram for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will show you the positioning and diagram of the fuses for the Toyota Yaris, in simple steps. First, open the bonnet of the vehicle and lo…
Layout and Positioning of the Fuses in the Toyota Yaris
Layout and Positioning of the Fuses in the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Below are the instructions that will allow you to discover the layout and positioning of the fuse boxes in the Toyota Yaris. First, get in the vehicl…

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos