Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace a Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

Changing the headlight bulb on a Toyota Yaris is not straightforward, as it requires disassembling quite a bit of bodywork. The headlight is designed in such a way that you cannot change the bulbs without removing part of the car. Start by removing the screws or rivets located under the bonnet to loosen the bumper, then go underneath the headlight, where there is a clip that needs to be removed by pushing it inwards.

After that, there are three more screws (shown in the video) to remove in order to detach the bodywork from the chassis. At this point, you can take out the headlight by disconnecting the wires from the electrical system, which is secured with a clip located on a rubber cap that needs to be removed.

Underneath, you will finally find the bulb. Replace it, reattach the clip, the rubber cap, the connector, and reposition the wires.

Next to it, there is the position light, where you simply pull the metal tabs, disconnect the connector, turn the bulb holder a quarter turn, and the bulb will come out. Now, reassemble the headlight, reattach all screws and the clip to the bodywork, ensuring it is securely in place.

The job is complete.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…
Toyota Yaris (2011-2019 / Xp130) To replace the front headlight bulb on a Toyota Yaris, open the bonnet and access the rear of the affected headlight. Remove the rubber or plastic pr…
Toyota Yaris (2005-2011 / Xp90) Today we will discover the steps on how to disassemble and replace the headlight bulb of the Toyota Yaris. First, we open the car's hood and start by…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos