Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform the Service Reset on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Warning light – error code

In this brief tutorial, learn how to reset the service light on a third-generation Toyota Yaris, specifically the model produced from 2012 to 2016. First, turn on the vehicle's instrument panel without starting the engine. Next, press the button on the right of the speedometer to scroll through the display options and stop when you reach "Trip A". Once done, switch off the vehicle and hold down the same button on the speedometer. Then, turn the instrument panel back on while continuing to hold the button until the reset is complete.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2011-2019 / Xp130) As shown in today's tutorial video, to reset the service light on a Toyota Yaris (2011-2019), first turn on the ignition without starting the engine.…
Toyota Yaris (2005-2011 / Xp90) These short and simple steps will show us how to reset the maintenance service light for the oil change of a Toyota Yaris. First of all, we get into …
Toyota Yaris (2011-2019 / Xp130) Today we will discover the steps that will show us how to reset the tire pressure warning light (TPMS) of the Toyota Yaris; before performing the res…

    Frequently Asked Questions

    • Yaris 2020-2027 - What are the Toyota Yaris warning lights? Read answer
    • Yaris 2005-2011 - What does the Cool light on the Toyota Yaris mean? Read answer
    • Yaris 1999-2005 - What does the "engine failure" light on my Toyota Yaris mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos