Do it yourself
Frequently asked questions about cars and motorcycles

Where to find the fuse boxes on the Toyota Yaris XP90

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuse box

The interior fuse box of the Toyota Yaris XP90 is located between the steering wheel and the driver's door, in a compartment with a cover that can be easily opened by hand. In the engine bay, the fuse box is situated between the battery and the right side of the body (when looking at the vehicle from the front), directly in front of the driver. On the opposite side, attached to the left side of the engine bay, near the front passenger side, is a small plastic box containing a series of relays, which may vary depending on the version and year of manufacture.

Updated on 10 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Yaris (2005-2011 / Xp90) Inside the Toyota Yaris, all fuses are contained within the designated fuse boxes installed in the vehicle. In this type of car, you can find two fus…
Toyota Yaris (2005-2011 / Xp90) In this guide, we will see the fuse box diagram and chart for the Toyota Yaris, in simple and quick steps. First, we open the hood of the car to loca…
Toyota Yaris (2005-2011 / Xp90) Each fuse installed in the Toyota Yaris is contained within specific fuse boxes located inside the vehicle. In this model, you can find two fuse boxe…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer
    • Yaris 2005-2011 - What is the Toyota Yaris horn fuse? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos