Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Tire pressure warning light

The tyre pressure warning light on a Toyota Aygo can be reset after all tyres have been inflated to the correct pressure value, which is indicated on the sticker affixed to the driver's door pillar. Once the tyres are correctly inflated, enter the cabin and turn on the ignition. Then, open the glove compartment on the passenger side to locate the SET button with the insufficient pressure icon. By holding this button for a few seconds, you can reset the warning light.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) The button to reset the tyre pressure warning light on the Toyota Aygo is located inside the glove compartment. Once opened, you should be able to lo…
How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre pressure warning light on the Toyota Aygo, first inflate the tyres to the recommended pressure value, which is indicated on the sti…
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To reset the tyre pressure warning light on a Toyota Aygo, first ensure all tyres are inflated to the correct pressure. This information is found on …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos