Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : How to reset the service light on Toyota Auris 2016

Toyota Auris - Video tutorial

Model: Toyota Auris E180 - Years 2012-2018
Part: Instrument cluster
Operation: How to reset the service light on Toyota Auris 2016

The procedure required to be able to manually reset the maintenance light on your 2016 Toyota Auris is quite simple and really takes a few seconds to complete. First, go inside the car and make sure it is completely turned off. Then locate the "Trip" button on the right side of the steering wheel and hold it down. Simultaneously insert the key and start the instrument panel. Wait for the recovery to finish automatically and finally release the "Trip" button. At this point the procedure is completed and you can switch off the ignition.


Posted on 5 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Auris 2018-2024 - What does the service light of the new Toyota Auris indicate? Read Answer
    • Auris 2007-2012 - How do you perform a system reset on a Toyota Auris? Read Answer
    • Auris 2007-2012 - What to do when the tire pressure warning light comes on on Toyota Auris? Read Answer
    • Auris 2012-2018 - What does the yellow engine light on the Toyota Auris 2 mean? Read Answer
    • Auris 2012-2018 - What are the warning lights on the dashboard of the Toyota Auris? Read Answer
    • Auris 2012-2018 - What spies does the Toyota Auris have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos