Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Tyre Pressure on Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Warning light – error code

How do you reset the tyre warning light on a Toyota Auris? Let's see how to perform the maintenance. Enter the vehicle, turn on the ignition with the appropriate key (the maintenance light will be illuminated), open the dashboard cover and press the Set button to confirm the maintenance (the tyre light will disappear). If the light does not turn off, you can inflate one of the tyres with compressed air (the light will then turn off). Always remember to make changes to the onboard computer with the engine off. Close the glove compartment after maintenance.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…
How to Reset the Tyre Pressure Warning Light on a Toyota Auris?
How to Reset the Tyre Pressure Warning Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) You can completely clear the tyre pressure warning light on a Toyota Auris by first inflating the tyres to the optimal pressure value: this value wil…
How to Replace the Absolute Pressure Sensor on the Toyota Auris 1.6i
How to Replace the Absolute Pressure Sensor on the Toyota Auris 1.6i
Toyota Auris (2007-2012 / E150) In this brief guide, you will find instructions to remove and replace the absolute pressure sensor or mass airflow sensor on the Toyota Auris 1.6i. F…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos