Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If you have found that there is a burnt bulb in a front headlight, the information and steps to follow for the replacement are provided below. After opening the bonnet, locate the headlight with the burnt bulb and proceed to detach the bulb holder by turning it counterclockwise from behind the headlight.

Then disconnect the power connector and take the new bulb to position it in the headlight housing and reconnect the power connector; at this point, the job is complete.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the 2010 Toyota Yaris
How to replace the front headlight bulb of the 2010 Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) When the front headlight bulb stops working, the causes can be a malfunction of the fuse, a malfunction of the connector, or a burnt-out bulb. To rep…
How to replace the front headlight bulb of the Toyota Yaris
How to replace the front headlight bulb of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb of your Toyota Yaris on your own, you just need to follow the few simple steps described in our new guide. After purcha…
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos