Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Switch in a Toyota Camry?

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Checks and maintenance

In this tutorial, you will learn how to replace the turn signal switch in a Toyota Camry. First, disconnect the negative terminal of the battery to prevent accidental airbag deployment. Next, remove the airbag from the steering wheel and disconnect the two internal connectors. Then, use a 19mm socket wrench to remove the large nut from the steering column, pull out the steering wheel, and open the turn signal switch cover by unscrewing the corresponding screws. Finally, disconnect all connectors, release the retaining clips, and remove the module from the column. To install the replacement, follow the procedure in reverse.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Engage or Disengage the Steering Lock on a Toyota Camry
How to Engage or Disengage the Steering Lock on a Toyota Camry
Toyota Camry (2011-2019 / Xv50) In this brief and simple guide, you will learn how to engage or disengage the steering lock on a Toyota Camry. First, get inside the vehicle and star…
How do you replace the power steering pump of the Toyota Camry?
How do you replace the power steering pump of the Toyota Camry?
Toyota Camry (2006-2013 / Xv40) In order to replace the power steering pump of the Toyota Camry, you need to open the hood so that you can access the components located inside the e…
How to remove the car radio from the Toyota Camry 2009
How to remove the car radio from the Toyota Camry 2009
Toyota Camry (2006-2013 / Xv40) If you own a 2009 Toyota Camry and are planning to remove the factory radio by yourself, then all you have to do is carefully read and follow the fol…

Other guides you may be interested in

    Frequently Asked Questions

    • Camry 1991-1996 - Why does the Toyota Camry overheat easily? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos