Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Toyota Rav4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Warning light – error code

This video shows the procedure to reset the maintenance light on the Toyota Rav4. This procedure is simple and quick to perform. To carry out this procedure, first, turn on the ignition, then press the button located on the left of the instrument cluster until the Trip A message appears on the display. Once you reach the Trip A message, turn off the ignition, then press and hold the button on the left of the instrument cluster, while holding it down, turn the ignition back on and the reset will begin. Once the reset is complete, release the button and restart the ignition.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset maintenance light on 2007 Toyota RAV4
How to reset maintenance light on 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument panel and make sure it i…
How to reset the "Service" light on a Toyota Rav4?
How to reset the "Service" light on a Toyota Rav4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the maintenance light on the Toyota RAV4, turn on the instrument panel without starting the engine and wait for the maintenance warning to a…

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos