Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Inspection Light on the Toyota Rav4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
This video is currently unavailable

In this article, you will learn how to reset the inspection light on your Toyota Rav4 if it remains on after carrying out the service. To reset it, first start the instrument panel, then using the button on the panel, set the car to trip A. At this point, switch off the panel, press and hold the button on the panel, while keeping it pressed, start the panel again.

Once started, wait about 10 seconds while holding the button, at the end of the 10 seconds, release the button; the car will emit a beep to confirm the reset. Now you can restart the panel to check that the procedure was successful and that the light is no longer present on the panel.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a 2007 Toyota RAV4
How to Reset the Maintenance Light on a 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument cluster and ensure it is…
How to reset the service light on a 2006 Toyota Rav4.
How to reset the service light on a 2006 Toyota Rav4.
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this article, we will show you how to reset the service light on a 2006 Toyota Rav4. We recommend doing this only after having the vehicle service…
How to Reset the TPMS Light on a Toyota RAV4
How to Reset the TPMS Light on a Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the tyre pressure monitoring system (TPMS) light on a Toyota RAV4, first check the tyre pressures when cold and adjust them to the values in…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos