Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2006 Toyota Rav4.

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

In this article, we will show you how to reset the service light on a 2006 Toyota Rav4. We recommend doing this only after having the vehicle serviced. First, you need to turn on the ignition and ensure that it is set to TRIP A; if not, set it by pressing the appropriate button on the dashboard.

Once the trip computer is set to TRIP A, turn off the ignition. After turning off the ignition, press and hold the navigation button on the dashboard.

While holding it down, turn on the ignition again. Now, keep holding the button until the procedure is complete, and the odometer is displayed as shown in the video.

Then, release the button, and the procedure will be complete.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to reset the Service light on a Toyota Rav4?
How to reset the Service light on a Toyota Rav4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the Service light on a Toyota Rav4, turn on the ignition by double-clicking the appropriate button to the right of the steering wheel. Then,…
How to Reset the Service Light on a Toyota RAV4
How to Reset the Service Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the service light on a Toyota RAV4, insert the key and turn on the ignition without starting the engine. Set the display to the total odomet…
Resetting the Maintenance Light on a Toyota RAV4
Resetting the Maintenance Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In today's video, we will see how to reset the maintenance light on a Toyota RAV4, third generation model produced from 2006 to 2013. Let's start the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos