Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply a Protective Film on the Pillars of the Toyota Tacoma?

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Accessory kit

See other generations:
Video tutorial

Applying a protective film on the window pillars of the Toyota Tacoma not only protects them from small scratches but also hides any existing defects on the vehicle. All you need is the protective film and a plastic squeegee to remove air bubbles (a card like a health insurance card works too). Clean the pillars thoroughly, wet them, and apply the film, making sure to align the edges.

Then, use the squeegee to eliminate any trapped air bubbles.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota Tacoma?
How to Reset the Service Light on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) Resetting the service light on a Toyota Tacoma is a simple and quick operation. First, turn on the ignition. Then, use the turn signals to navigate t…
How to Remove the Tail Lights on a Toyota Tacoma?
How to Remove the Tail Lights on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) As we can see in this tutorial, removing the tail lights on a Toyota Tacoma is an extremely simple and quick operation. Before proceeding, to operate…
How to Replace the License Plate Bulb on a Toyota Tacoma
How to Replace the License Plate Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To replace the license plate light bulb on a Toyota Tacoma, access the underside of the rear bumper to disconnect the connector attached to the bulb.…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos