Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sequoia
  6. : How to remove the front headlights of the Toyota Sequoia?

Toyota Sequoia - Video tutorial

Model: Toyota Sequoia Xk30, Xk40 - Years 2001-2007
Part: Headlight
Operation: How to remove the front headlights of the Toyota Sequoia?

Let's discover in this short guide the steps on how to disassemble and replace the front headlights of the Toyota Sequoia, following the instructions provided below. First, let's open the hood of our car and start by removing the small side indicators. To do this, unscrew the screw that we find at the top, as shown in the video. At this point, unscrew the additional screws of the headlight assembly; then disconnect the electrical connector of the bulbs to remove it and replace it with the new one, replacing either the bulbs or just the bulbs. All that's left is to reassemble everything!


Posted on 30 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos