Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : What is the fuse layout of the Toyota Land Cruiser?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Fuse box
Operation: What is the fuse layout of the Toyota Land Cruiser?

If one of the various devices in our Toyota Land Cruiser suddenly stops working, the first thing we can do is check the status of the respective fuses, whose location is indicated in this video. We find the first two fuse boxes inside the cabin, one on the passenger side and the other on the driver's side, both below the dashboard. The third fuse box is instead located in the engine compartment, protected by the black plastic cover near the battery. Make sure to replace any faulty fuses with equivalent replacement parts.


Posted on 18 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - Where are the fuses located on the Toyota Land Cruiser d4d? Read Answer
    • Land Cruiser 2007-2021 - Where are the fuse boxes located on Toyota Land Cruiser j150? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos