Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Transmission on a Toyota Camry?

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Warning light – error code

To reset the transmission on a Toyota Camry, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboard relative to the steering column. Once the scanner is connected, select the specific car model and its corresponding version. Follow all instructions in the owner's manual to reset the transmission settings. After completing the process, disconnect the scanner.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the automatic transmission of the Toyota Camry
How to reset the automatic transmission of the Toyota Camry
Toyota Camry (2011-2019 / Xv50) In this guide we will see the instructions that will allow us to reset the automatic transmission of the Toyota Camry. In order to reset the automati…
Checking Engine Oil and Transmission Fluid on a 2006-2009 Toyota Camry 2.4
Checking Engine Oil and Transmission Fluid on a 2006-2009 Toyota Camry 2.4
Toyota Camry (2006-2013 / Xv40) The video shows how to check the engine oil and transmission fluid on a 2006-2009 Toyota Camry 2.4. It is a very simple operation that can be done by…
How to Reset the ECU of a Toyota Camry?
How to Reset the ECU of a Toyota Camry?
Toyota Camry (2006-2013 / Xv40) To reset the ECU of a Toyota Camry, open the hood to access the components inside the engine compartment. Near the left headlight, you will find the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos