|
Do it yourself
| |||
| ||||
How to replace the front control arm in a Toyota RAV4 II
Model: Toyota Rav 4
MK 2, Xa20
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
In this video tutorial, you can see how to replace the front control arm in a Toyota RAV4 II by following some important steps: loosen the wheel bolts without fully unscrewing them; lift the vehicle using a hydraulic jack and place safety stands underneath; once the vehicle is raised, fully unscrew the wheel bolts; remove the wheel and place it under the vehicle. Unscrew the rear fasteners (as shown in the video). Lubricate with a lubricant spray (WD-40) and clean with a wire brush. Place a jack under the brake disc and remove the control arm. Install the new control arm and tighten the fasteners. Use a product to treat all the joints of the arm.
Updated on 15 August 2026 by ScegliAuto
Related tutorials
Toyota Rav 4
(2006-2013 /
Xa30, MK 3)
In this tutorial, you will learn how to replace the wiper blades on a Toyota RAV4. For the rear wiper, open the cover of the mounting bolt and then l…
Toyota Rav 4
(2019-2026 /
MK 5, Xa50)
In today's tutorial, you will learn how to remove and replace the rear wiper on the fifth generation Toyota Rav4, following the instructions below. F…
Toyota Rav 4
(2013-2018 /
Xa40, MK 4)
To replace the rear wiper blade on a Toyota Rav4, press the side tabs located at the cover of the wiper pin. This will allow you to lift the wiper ar…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
