Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Control Arm.

Model: Toyota Gt86 ZN6, ZC6 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Control arm

Video tutorial

Place the car on a ramp or use a jack to lift the front end. Remove the front tyre. Locate the control arm and its mounting points.

Unscrew the two bolts securing the control arm to the body and finally the bolt connecting the control arm to the wheel. Start to move the control arm away from the wheel and then from the connections to the body, and remove it from its position.

Now proceed to install the new control arm. The steps are the same as before but performed in reverse order. The car on which the removal is performed is a Toyota GT86.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Installing a Ball Joint with Grease Nipple on the Suspension Arm
Installing a Ball Joint with Grease Nipple on the Suspension Arm
Hyundai Santa Fe (2000-2006 / MK 1) Replacing the ball joint on the suspension arm with one that has a grease nipple will certainly increase its lifespan as well as driving comfort. Ess…
Replacement of the Rear Suspension Arm
Replacement of the Rear Suspension Arm
Hyundai Elantra (2000-2006 / MK 3, XD) Replacing the rear suspension arm is very simple as there is no need to disassemble any other components apart from the arm's fixings. Lift the vehic…
Removing the Rear Wiper Arm of the Ford Kuga
Removing the Rear Wiper Arm of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Want to remove the rear wiper arm? Follow the steps to detach the arm and install it on the rear tailgate of the Kuga. Lift the protective plastic on…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos