Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Wiper Arm of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Windshield wipers

Want to remove the rear wiper arm? Follow the steps to detach the arm and install it on the rear tailgate of the Kuga. Lift the protective plastic on the side of the wiper arm. Under the plastic, locate the nut securing the wiper arm. Use the appropriate spanner to unscrew the nut that holds the wiper arm: slide the arm off the thread. Once the wiper arm is removed, fit the new piece onto the tailgate of the car. After securing it, test the operation of the arm with the control lever.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper on a Ford Kuga?
How to Replace the Rear Wiper on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the rear wiper on a Ford Kuga, lift the wiper arm to the working position. Then, rotate the blade approximately 90 degrees relative to the…
How to Replace the Rear Wiper Blade on a Ford Kuga
How to Replace the Rear Wiper Blade on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, you will see how to replace the rear wiper blade on a Ford Kuga, an extremely simple and quick operation. First, ensure the wiper i…
How to Replace the Wiper Blades on a Ford Kuga
How to Replace the Wiper Blades on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video, see how to replace the wiper blades on a Ford Kuga. The procedure is simple and takes little time to complete. To replace the wiper bl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos