Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Alphard Vellfire
  6. : How do you replace the fuel pump of the Toyota Alphard?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Fuel pump
Operation: How do you replace the fuel pump of the Toyota Alphard?

In order to replace the fuel pump of the Toyota Alphard, it is necessary to completely remove the rear seat bench so that access to the underlying fuel pump can be obtained. The pump can then be removed from its housing by unscrewing the securing screws and disconnecting the appropriate tubes and connectors. Once the old pump has been removed, the new one can be inserted into its seat, connected to the appropriate connectors, and secured with screws. After installation, the bench can be covered, and it should be verified that everything is functioning correctly.


Posted on 28 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos