Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Windscreen Wiper Fuses in a Toyota RAV4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Windshield wipers

See other generations:
Video tutorial

If the windscreen wipers on your Toyota RAV4 have suddenly stopped working, first check the status of the relevant fuses, whose location is indicated in this video. As shown, there are two fuses located in the box inside the engine compartment, specifically behind the small glove compartment located at the bottom of the dashboard on the driver's side.

They are labelled F17 and F18, corresponding to the rear and front wipers, respectively. If faulty, ensure you replace them with spares of equivalent specifications.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Toyota RAV4
How to Replace the Wiper Blades on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this tutorial, you will learn how to replace the wiper blades on a Toyota RAV4. For the rear wiper, open the cover of the mounting bolt and then l…
Replace the Rear Wiper on the Toyota Rav4 MK5
Replace the Rear Wiper on the Toyota Rav4 MK5
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In today's tutorial, you will learn how to remove and replace the rear wiper on the fifth generation Toyota Rav4, following the instructions below. F…
How to Replace the Rear Wiper Blade on a Toyota Rav4?
How to Replace the Rear Wiper Blade on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the rear wiper blade on a Toyota Rav4, press the side tabs located at the cover of the wiper pin. This will allow you to lift the wiper ar…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos