Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avalon
    4. : How to reset the tire pressure on Toyota Avalon

Toyota Avalon - Video tutorial

Model: Toyota Avalon Xx40 - Years 2013-2018
Part: Checks and maintenance
Operation: How to reset the tire pressure on Toyota Avalon

Thanks to this very short tutorial today, you will be able to see the entire procedure to follow to reset the tire pressure warning light on a Toyota Avalon, third-generation model produced from 2013 to 2018. Performing this operation is very simple, as we just need to turn on the ignition of the vehicle and then press the appropriate reset button, located behind the passenger side glove compartment door, and hold it down until the pressure warning light on the dashboard flashes three times. Before performing this operation, it is important to check the correct pressure of all four tires.


Posted on 28 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Avalon 2013-2018 - How do you reset the tire pressure sensor in the Toyota Avalon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos