Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light Bulb on a Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Light bulb

Today, learn how to replace the boot light bulb on a Toyota Yaris Cross. Open the boot and remove the light cover using a flathead screwdriver. Disconnect the connector and then extract the bulb, insert a new bulb, in this case, an LED, and reconnect the connector. Close the cover and test its operation. Typically, these types of interior bulbs illuminate when the tailgate is opened and turn off when closed. If the LED bulb does not work, you can replace the connector with a more powerful one.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install LED Lights in the Boot of a Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) In this video tutorial, see how to install LED lights in the boot of a Toyota Yaris Cross by following a few simple steps that allow you to work inde…
How to Reset the Service Light on the Toyota Yaris Cross
How to Reset the Service Light on the Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) In this video, we will see how to reset the service light on the Toyota Yaris Cross. The display shows that the oil is deteriorated and that it needs…
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) Good morning, today you will locate and access the fuse box of your Toyota Yaris Cross. First, open the front engine bonnet. You will notice a black …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos