Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Bonnet on the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Body

See other generations:
Video tutorial

In this tutorial, we will see how to open the bonnet on the Toyota Aygo, a very simple operation that follows the typical procedure for most vehicles. First, unlock the latches using the appropriate button on the remote, then open the driver's door, locate the lever at the lower area of the dashboard on the left side, and operate it. Next, go to the front of the vehicle, press the second lever towards the centre of the car, and open the bonnet.

To close it, simply let it fall gently.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) In today's tutorial, you will learn how to open the bonnet of the Toyota Aygo in simple and quick steps. First, access the front passenger compartmen…
Toyota Aygo (2014-2023 / Ab40, MK 2) In this tutorial, you will learn how to open the bonnet in the Toyota Aygo, a very simple operation that follows the standard procedure of most vehic…
Toyota Aygo (2014-2023 / Ab40, MK 2) In this tutorial, you will learn how to open the bonnet of a Toyota Aygo, in case you need to top up the coolant, windscreen washer fluid, or perform…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos