Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Toyota Auris?

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

The procedure for removing the rear light on the Toyota Auris involves opening the tailgate to access the components in the boot: here you will need to detach the internal trim of the boot to access the screws that secure the light unit in place. Once the screws are loosened, you can slide out the light and disconnect its connector from the inside: at this point, you can connect the new light unit, inserting it into its housing and securing it with the appropriate screws.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to remove the rear light on a Toyota Auris?
How to remove the rear light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To remove the rear light on a Toyota Auris, open the rear hatch of the car to access the screws that secure the light unit to its housing: these scre…
How to Remove the Rear Light of a Toyota Auris
How to Remove the Rear Light of a Toyota Auris
Toyota Auris (2007-2012 / E150) Before you can start, open the boot of your Toyota Auris. Begin by unscrewing and removing the screws that secure the side cover near the rear light,…
Replacing the Rear Light Bulb on a Toyota Auris
Replacing the Rear Light Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Today, we will discover the instructions that will allow us to remove and replace the rear light bulb or stop light on a Toyota Auris. First, open th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos