Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : What is the fuse layout for the Toyota 4Runner?

Toyota 4runner - Video tutorial

Model: Toyota 4runner N280 - Years 2010-2023
Part: Fuse box
Operation: What is the fuse layout for the Toyota 4Runner?

If one or more devices in our Toyota 4Runner have suddenly stopped working, the first thing we can do is check the status of the respective fuses, whose diagrams are indicated in this video. We find the first box inside the cabin, behind the small panel located in the lower area of the dashboard, on the driver's side. The second box is instead located inside the engine compartment, below the plastic cover behind the battery. In case of a blown fuse, make sure to use a replacement with the same specifications, so as not to cause any damage.


Posted on 12 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 4runner 2010-2023 - Where is the fuse for the Toyota 4Runner cigarette lighter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos