Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre pressure light on a Toyota Aygo, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the instructions in the manual.

Start by getting inside the cabin, then insert the key and turn on the instrument panel. Next, open the passenger glove compartment, locate the indicated button, and hold it down until the light disappears from the dashboard.

Finally, restart the vehicle to complete the procedure.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
How to Reset the Tyre Light in a Toyota Aygo X?
How to Reset the Tyre Light in a Toyota Aygo X?
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this tutorial, see how to reset the tyre light in a Toyota Aygo X, a very simple and quick operation, to be performed only after restoring the cor…
How to reset the tire pressure warning light on a Toyota Aygo?
How to reset the tire pressure warning light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tire pressure light on a Toyota Aygo, start by locating the reset button, which is found in the front passenger side glove box. Turn on …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos