Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure on a Toyota Tundra

Model: Toyota Tundra Xk50 - Years 2007-2021
Part:

Through this very short video tutorial, we can see the entire operation necessary to reset the tire pressure light on a Toyota Tundra, model produced starting from the year 2007. We start by turning on the vehicle's ignition to the first "ACC" position, then we check the correct pressure of all four tires. Once this is done, we turn the ignition to the "ON" position and press the appropriate tire pressure reset button, located under the steering wheel, and hold it down until the pressure light flashes three times. Finally, we wait for 3 to 6 minutes and restart the vehicle.

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tire Pressure Monitor on a Toyota Tundra
Resetting the Tire Pressure Monitor on a Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) In today's video, we will see the entire procedure needed to reset the tire pressure monitor on a Toyota Tundra, model produced from 2007 to 2021. Fi…
How to reset the tire pressure light on the Toyota Tundra pickup truck?
How to reset the tire pressure light on the Toyota Tundra pickup truck?
Toyota Tundra (2007-2021 / Xk50) Resetting the tire pressure light on the Toyota Tundra pickup truck, as we can see in this tutorial, is an extremely simple and quick operation. Befo…
Reset Tire Pressure on a Toyota Tundra
Reset Tire Pressure on a Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) In this brief yet useful video tutorial, you will see how to reset the tire pressure warning light on a Toyota Tundra, a second generation model prod…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos