Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Warning Light in a Toyota Tundra Pickup?

Model: Toyota Tundra Xk50 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the tire warning light in a Toyota Tundra pickup, a very simple and quick operation to perform only after restoring the correct pressure in each tire following the instructions in the manual. First, go inside the cabin, then insert the key and turn on the instrument panel.

Next, locate the "SET" button located at the bottom of the dashboard on the driver's side, hold it down until the warning light disappears from the panel, and complete the procedure by restarting the vehicle.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota Tundra?
How to Reset the Service Light on a Toyota Tundra?
Toyota Tundra (2022-2026 / Xk70) To reset the Service light on your Toyota Tundra, insert the key into the ignition and turn it to the ON position. Once the dashboard lights up, navi…
How to Reset Tire Pressure on a Toyota Tundra
How to Reset Tire Pressure on a Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) This brief video tutorial shows the steps needed to reset the tire pressure warning light on a Toyota Tundra, model produced from 2007 onward. Start …
How do you reset the tire pressure light on the Toyota Tundra?
How do you reset the tire pressure light on the Toyota Tundra?
Toyota Tundra (2000-2006 / Xk30, Xk40) In order to reset the tire pressure warning light on the Toyota Tundra, you will need to inflate the tires to the recommended pressure value: this va…

How to Reset the TPMS Light on the 2014 Toyota Yaris

Resetting the TPMS light, which relates to tyre pressure, is a simple and quick task that can be done independently on the 2014 Toyota Yaris. To reset the light, turn on the ignition and press the RESET button located under the dashboard on the driver's side. While holding the button down, you can access the reset function and wait a few seconds before releasing the button. Once the ignition is restarted, the light will turn off. If the light does not reset, you may need to perform the reset using a scanner and OBD port at a garage.

Watch the video!


by ScegliAuto

More videos