Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Toyota RAV 4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Tire pressure warning light

The procedure for resetting the tire pressure light on the Toyota RAV 4 requires first inflating all tires to the recommended pressure value: this value is written on the sticker attached to the driver's side door frame. Once all tires have been inflated, you can turn on the instrument panel by inserting the ignition key into the corresponding slot. At this point, you will need to hold down the SET button located under the steering column: this will turn off the tire pressure light and the instrument panel can be turned off.

Posted on 23 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Toyota RAV 4?
How do you reset the tire pressure light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tire pressure warning light of the Toyota RAV 4, first inflate the tires to the optimal pressure value: this value is indicated on the s…
How to reset the tire pressure light on the Toyota RAV4
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) When the tire pressure warning appears on the instrument panel, it is likely that there is a loss of pressure in one or more tires; let's see how to …
How do you reset the tire pressure light on the Toyota RAV4?
How do you reset the tire pressure light on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the tire pressure warning light on the Toyota RAV 4, you need to inflate the tires to the correct pressure value: this value will be indicat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos