Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Toyota RAV 4?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on a Toyota RAV 4, first inflate the tyres to the optimal pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once the tyres are inflated, proceed by turning on the instrument panel; if the light remains on, drive for a few miles to allow the sensors to read the new pressure values.

After a few minutes, the light will disappear completely.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the car tyres to the correct pressure value, which is indicated on the st…
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4?
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the tyre pressure warning light on the Toyota RAV4, turn on the instrument panel by rotating the key in the ignition switch. Once the panel …
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today, in this brief and simple guide, you will see the steps to reset the tyre pressure warning light (TPMS) on the Toyota RAV4; before performing t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos