|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
Model: Toyota Corolla
MK 5, E210
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To reset the tyre pressure warning light on the Toyota Corolla, inflate the tyres until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, open the glove compartment located on the passenger side: inside, you will find the SET button, which must be pressed and held until the corresponding light turns off. After completing the operation, you can also turn off the instrument panel.
Updated on 12 October 2026 by ScegliAuto
Related tutorials
Toyota Corolla
(2006-2013 /
MK 3)
Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla
(2006-2013 /
MK 3)
To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…
Toyota Corolla
(2019-2026 /
MK 5, E210)
Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…
Other guides you may be interested in
|
How to Extract the Spare Wheel from a Mercedes Vito
The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
