Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

Today, learn how to reset the service light on your Toyota Yaris. This vehicle requires two simple steps.

The first step is to press the button on the dashboard display until the light turns off. The second step is to hold the button while turning on the ignition. After completing both steps, turn off and then turn on the ignition again.

If the reset does not succeed, you may need to visit a garage for a diagnostic check to resolve the issue.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Yaris
How to Reset the Service Light on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this guide, you will perform the reset of the service light for the regular maintenance oil change on the Toyota Yaris. First, get inside the vehi…
How to Reset the Service Light on a Toyota Yaris?
How to Reset the Service Light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) You can completely eliminate the Service light from the instrument panel of the Toyota Yaris by holding down the button located on the right side of …
How to Reset the Service Light on a Toyota Yaris?
How to Reset the Service Light on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The procedure to reset the Service light on a Toyota Yaris requires you to keep the instrument cluster off and then press and hold the button located…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos