Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine of the Triumph Daytona 675?

Model: Triumph Daytona 675
Part: Engine

Video tutorial

It will be possible to replace the engine of the Triumph Daytona 675 by loosening the screws that secure the block to its housing, in the front part of the frame: once the fixing screws of the supports have been loosened, it will be possible to proceed by loosening also the screws that fix the intake and exhaust manifolds.

Once the connectors connected to the respective sensors have been disconnected, it will be possible to completely remove the engine block from its seat and install the new one: it will be necessary to properly secure and connect it to verify that everything works.


Posted on 22 May 2025 by ScegliAuto


Related tutorials

How to replace the stator of the Triumph Daytona 675
How to replace the stator of the Triumph Daytona 675
Daytona 675 Below we will discover the instructions that will allow us to disassemble and replace the stator of the Triumph Daytona 675 motorcycle. First, we pla…
Engine Oil and Oil Filter Replacement on a 2013 Triumph Daytona 675
Engine Oil and Oil Filter Replacement on a 2013 Triumph Daytona 675
Daytona 675 In this video, you will see step-by-step instructions on how to replace the engine oil and oil filter on a 2013 Triumph Daytona 675, performing the r…
How to replace the engine oil in the Triumph Daytona 675?
How to replace the engine oil in the Triumph Daytona 675?
Daytona 675 In this tutorial we can see how to replace the engine oil in the Triumph Daytona 675, an extremely simple and quick operation. First of all, make sur…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos