|
Do it yourself
| |||
| ||||
|
Model: Triumph Speed Triple
To clear the Service light on the Triumph Speed Triple 1200 RS, connect a diagnostic tool to the vehicle's OBD port, which is located just under the seat of the motorcycle. To access the port, you will need to remove the seat and connect the scanner: once connected, follow the on-screen instructions to completely clear the light. After the light has been cleared, you can disconnect the scanner and check that everything is functioning.
Posted on 24 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Speed Triple
In this tutorial we can see how to reset the service on the Triumph Speed Triple 1200 RS, an extremely simple and fast operation, to be carried out o…
Speed Triple
If the key for your Triumph Speed Triple 1200 RS has suddenly stopped working due to a flat battery and you want to know how to replace it, simply re…
Speed Triple
In today's video, see how to reset the service light on a Triumph Speed Triple. This tutorial also applies to other models from the British motorcycl…
|
How to Replace the Clutch Cable on the Royal Enfield Classic 350
In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
