Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Triumph Bonneville?

Model: Triumph Bonneville
Part: Air filter

Video tutorial

To replace the air filter on a Triumph Bonneville, you need to loosen the screw that secures the side cover. Once removed, you can disconnect the underlying connectors and the starter solenoid.

At this point, you can loosen three screws that will allow you to remove a plastic cover with a tube, around which the air filter will be located. This can now be pulled out of its housing and replaced with a new spare part.

After completing the operation, reassemble all the parts removed earlier.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Triumph Bonneville?
How to Replace the Air Filter on the Triumph Bonneville?
Bonneville To replace the air filter on the Triumph Bonneville, loosen the screws that secure the filter in its housing: these will be located on the right side…
How to Replace the Oil and Oil Filter on the Triumph Bonneville?
How to Replace the Oil and Oil Filter on the Triumph Bonneville?
Bonneville To replace the oil on the Triumph Bonneville, you need to loosen the oil drain plug with a socket spanner: this is located at the bottom of the bike,…
How to Replace the Engine Oil and Oil Filter on the Triumph Bonneville SE
How to Replace the Engine Oil and Oil Filter on the Triumph Bonneville SE
Bonneville This brief and simple guide explains how to perform the routine maintenance service by replacing the engine oil and oil filter on the Triumph Bonnevi…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos