Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the air filter of the Triumph Bonneville, you need to loosen the screws that secure the filter to its housing: these will be located on the right side of the vehicle and once loosened, will allow you to remove the filter from inside its housing. Once the old filter has been removed, you can insert the new one into its housing, securing it with the external screws that were previously removed. After installation, you can verify that everything is functioning properly with the new filter.

Posted on 5 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Triumph Bonneville?
How to Replace the Air Filter on a Triumph Bonneville?
Bonneville To replace the air filter on a Triumph Bonneville, you need to loosen the screw that secures the side cover. Once removed, you can disconnect the und…
How to Change the Engine Oil on a Triumph Bonneville?
How to Change the Engine Oil on a Triumph Bonneville?
Bonneville To change the engine oil on a Triumph Bonneville, access the lower part of the motorcycle at the front, where you will find the oil drain plug. Once …
How do you replace the engine oil of the Triumph Bonneville?
How do you replace the engine oil of the Triumph Bonneville?
Bonneville In order to perform the oil change on the Triumph Bonneville, you need to loosen the drain plug located in the central lower part of the motorcycle: …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos