Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Triumph Bonneville SE

Model: Triumph Bonneville
Part: Engine oil

Video tutorial

This brief and simple guide explains how to perform the routine maintenance service by replacing the engine oil and oil filter on the Triumph Bonneville SE. First, remove the metal cover located underneath the engine by unscrewing the screws; then, remove the oil drain bolt and allow the oil to drain into a container for about ten minutes.

At this point, unscrew and remove the oil filter using the appropriate tool; replace the cartridge with a new one, ensuring the gasket is correctly positioned, and pour in the new engine oil, ensuring it meets the correct specifications!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Changing the Engine Oil and Oil Filter of the Triumph Bonneville
Changing the Engine Oil and Oil Filter of the Triumph Bonneville
Bonneville This guide covers the routine maintenance service, replacing the engine oil and oil filter for the Triumph Bonneville motorcycle. First, place the bi…
How to Replace the Oil and Oil Filter on the Triumph Bonneville?
How to Replace the Oil and Oil Filter on the Triumph Bonneville?
Bonneville To replace the oil on the Triumph Bonneville, you need to loosen the oil drain plug with a socket spanner: this is located at the bottom of the bike,…
Engine Oil and Filter Replacement on a Triumph Bonneville
Engine Oil and Filter Replacement on a Triumph Bonneville
Bonneville Engine oil and filter replacement on a Triumph Bonneville. Follow this guide to perform the maintenance. Position your motorcycle on the original sta…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos