Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement on a Triumph Bonneville

Model: Triumph Bonneville
Part: Engine oil

Video tutorial

Engine oil and filter replacement on a Triumph Bonneville. Follow this guide to perform the maintenance.

Position your motorcycle on the original stand; remove the horn to access the oil bolt. Use a spanner to unscrew the bolt from the oil sump and drain the fluid into a container.

Unscrew the securing screws of the metal container cap (right side of the engine) where the filter is located. Remove the worn oil filter and fit a new one after cleaning (check the gasket around the metal cap). Finally, top up the new fluid in the engine.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Changing the Engine Oil and Oil Filter of the Triumph Bonneville
Changing the Engine Oil and Oil Filter of the Triumph Bonneville
Bonneville This guide covers the routine maintenance service, replacing the engine oil and oil filter for the Triumph Bonneville motorcycle. First, place the bi…
How to Change the Engine Oil on a Triumph Bonneville?
How to Change the Engine Oil on a Triumph Bonneville?
Bonneville To change the engine oil on a Triumph Bonneville, access the lower part of the motorcycle at the front, where you will find the oil drain plug. Once …
How to Replace the Engine Oil and Oil Filter on the Triumph Bonneville SE
How to Replace the Engine Oil and Oil Filter on the Triumph Bonneville SE
Bonneville This brief and simple guide explains how to perform the routine maintenance service by replacing the engine oil and oil filter on the Triumph Bonnevi…

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos