Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we see the main instructions for removing and replacing the rear brake pads on a Triumph Speed Triple. First, lift the rear wheel using a paddock stand, and begin to unscrew the fixing bolts of the rear brake caliper using a socket spanner. Then remove the old pads found inside the caliper, as shown in the video. At this point, lever the caliper piston back in, clean off any dirt, and install the new pads, applying the reverse procedure!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Front Brake Pads on Triumph Speed Triple
How to Replace Front Brake Pads on Triumph Speed Triple
Speed Triple In this video, learn how to remove and replace the front brake pads on a Triumph Speed Triple motorcycle by following these simple steps. First, unsc…
How to Replace the Front Brake Pads on the Triumph Speed Triple 1050
How to Replace the Front Brake Pads on the Triumph Speed Triple 1050
Speed Triple Follow these steps to remove and replace the front brake pads on the Triumph Speed Triple 1050. First, place the motorcycle on a stand and start unsc…
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Speed Triple This guide shows you how to remove and replace the front brake pads on the Triumph Speed Triple 1050. First, place the bike on a stand and start unsc…

How to Replace the Front Headlight Bulb on a BMW R1150 R?

This tutorial shows how to replace the front headlight bulb on a BMW R1150 R, a very simple and quick task. First, ensure the key is not inserted for safety. Then locate the screw at the bottom edge of the headlight and remove it. Next, separate the headlight from the base, disconnect the power connector, and extract the old bulb by releasing the metal clip. Finally, insert the new bulb without touching the glass with bare hands, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos