Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on a Triumph Speed Triple?

Model: Triumph Street Triple R
Part: Light bulb

Video tutorial

To replace the indicator bulb on the Triumph Speed Triple, you need to unscrew the screw that secures the side panel of the motorcycle, where the indicator light is located. This will need to be detached by disconnecting the appropriate cable inside.

Once the cable is removed, you can pull out the bulb from the light unit to replace it with a new one. After replacing, reconnect the side light unit, securing it to the motorcycle's side panel with the previously removed screw.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Triumph Speed Triple R
Street Triple R To replace the headlight bulb on the Triumph Speed Triple R, loosen the screws that secure the headlamp unit to its housing: these screws are located…
How do you replace the exhaust of the Triumph Speed Triple R?
How do you replace the exhaust of the Triumph Speed Triple R?
Street Triple R The exhaust pipe of the Triumph Speed Triple R can be replaced by loosening the screws that hold it in place on the right side of the motorcycle, nea…
How to Replace the Air Filter on the Triumph Speed Triple RS?
How to Replace the Air Filter on the Triumph Speed Triple RS?
Street Triple R To replace the air filter on the Triumph Speed Triple RS, loosen the screws securing the fuel tank to its housing. Once the tank screws are loosened,…

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos