Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on your Triumph Thunderbird, start by ensuring the engine is cold. Next, position the bike on a stable, level surface. Remove the oil cap on the right side of the engine and place a container under the oil drain plug. Remove the drain plug and allow the old oil to drain completely. Inspect and replace any damaged seals. Tighten the drain plug securely. Proceed to fill the engine with the recommended lubricant to the correct level. Replace the oil cap and start the engine to allow for even oil distribution. Turn off the engine and check the oil level using the dipstick. Add oil if necessary and replace the oil cover. Finally, dispose of the used oil properly.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Triumph Thunderbird?
How to Change the Engine Oil in a Triumph Thunderbird?
Thunderbird In this tutorial, you will learn how to change the engine oil in a Triumph Thunderbird, a very simple and quick operation. First, wait for the engine…
How to Change the Engine Oil of the Triumph Thunderbird?
How to Change the Engine Oil of the Triumph Thunderbird?
Thunderbird To change the engine oil of the Triumph Thunderbird, loosen the drain plug located at the central lower part of the oil tank. Once the plug is loosen…
How do you replace the battery of the Royal Enfield Thunderbird?
How do you replace the battery of the Royal Enfield Thunderbird?
Thunderbird In order to replace the battery of the Royal Enfield Thunderbird, you need to loosen the screws that secure the battery protection panel: this panel …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos