Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Thunderbird

Triumph Thunderbird - Videoguide

Triumph Thunderbird
How to replace the engine oil of a Triumph Thunderbird?
To proceed with the engine oil replacement on our Triumph Thunderbird, start by checking that the engine is cold. Then, place the motorcycle on a stable and …read all…
Posted on 25 March 2024 by ScegliAuto
Triumph Thunderbird
How do you replace the engine oil on the Triumph Thunderbird?
In order to replace the engine oil of the Triumph Thunderbird, you need to loosen the drain plug of the oil tank, located in the central lower part of the …read all…
Posted on 22 August 2023 by ScegliAuto
Triumph Thunderbird
How to replace engine oil in Triumph Thunderbird?
In this tutorial we can see how to replace the engine oil in the Triumph Thunderbird, an extremely simple and fast operation. First of all, let's wait for the …read all…
Posted on 13 April 2023 by ScegliAuto
Triumph Thunderbird
Replacing the headlight bulb on Triumph Thunderbird
To remove the front light from its seat, simply unscrew the four side screws (two on each side) of the light itself, very well indicated in the video. Once you …read all…
Posted on 15 February 2024 by ScegliAuto
Triumph Thunderbird
Replacing the front brake pads on Triumph Thunderbird
Before servicing the brakes, it is recommended to empty the brake fluid container and top up it at the end of the process. To free the brake caliper from the …read all…
Posted on 12 February 2024 by ScegliAuto
Headlight bulb (1) Engine oil (3) Brake pads (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos