Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the front headlamp from its housing, simply unscrew the four side screws (two on each side) of the headlamp, as clearly shown in the video. Once the screws are removed and the headlamp is taken out, disconnect the connector and manually remove the round rear cover. At this point, unclip the metal retaining clip and extract the bulb. Done! The video shows how to switch from halogen to LED, but if you only want to replace the bulb, simply reverse the steps from inserting the new bulb back to reassembling the headlamp.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Triumph Thunderbird?
How to Change the Engine Oil of the Triumph Thunderbird?
Thunderbird To change the engine oil of the Triumph Thunderbird, loosen the drain plug located at the central lower part of the oil tank. Once the plug is loosen…
How to Change the Engine Oil in a Triumph Thunderbird?
How to Change the Engine Oil in a Triumph Thunderbird?
Thunderbird In this tutorial, you will learn how to change the engine oil in a Triumph Thunderbird, a very simple and quick operation. First, wait for the engine…
How to Change the Engine Oil on a Triumph Thunderbird
How to Change the Engine Oil on a Triumph Thunderbird
Thunderbird To change the engine oil on your Triumph Thunderbird, start by ensuring the engine is cold. Next, position the bike on a stable, level surface. Remov…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos