Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the UAZ Patriot

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Diesel fuel filter

In this short and simple guide, you will find instructions on how to remove and replace the fuel filter on the UAZ Patriot. First, lift the vehicle and locate the fuel filter; then, disconnect the inlet and outlet hoses from the fuel filter by pressing the blue tabs, as shown in the video. At this point, unscrew the bracket screws to remove and replace the filter cartridge with the new one using a socket wrench; then, install the new fuel filter, following the video tutorial to the end!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a UAZ Patriot?
How to Replace the Cabin Air Filter in a UAZ Patriot?
UAZ Patriot (2005-2022 / MK 1) As seen in this tutorial, replacing the cabin air filter in the UAZ Patriot is an extremely simple and quick task. First, sit in the passenger seat, …
Replacing the Air Filter on the Uaz Patriot
Replacing the Air Filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) In this video tutorial, you will see how to remove and replace the engine air filter on the Uaz Patriot, following the instructions below. First, ope…
How to Change the Engine Oil and Oil Filter on the Uaz Patriot
How to Change the Engine Oil and Oil Filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) Let's go through the necessary steps to perform routine maintenance by replacing the engine oil and oil filter on the Uaz Patriot. First, lift the ve…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos