Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing Engine Oil and Oil Filter on the Uaz Patriot

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Engine oil

Today's guide will show you how to perform routine maintenance by replacing the engine oil and oil filter on the Uaz Patriot. First, lift the vehicle and start draining the engine oil by removing the drain plug found on the oil pan; then remove the oil filter cartridge using the appropriate wrench, and hand-tighten the new one. At this point, unscrew the oil fill cap and raise the oil dipstick; top off and fill to the maximum level mark!

Updated on 13 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil and Oil Filter on the Uaz Patriot
How to Change the Engine Oil and Oil Filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) Let's go through the necessary steps to perform routine maintenance by replacing the engine oil and oil filter on the Uaz Patriot. First, lift the ve…
Replacing the Air Filter on the Uaz Patriot
Replacing the Air Filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) In this video tutorial, you will see how to remove and replace the engine air filter on the Uaz Patriot, following the instructions below. First, ope…
How to Perform Routine Maintenance on a UAZ Patriot
How to Perform Routine Maintenance on a UAZ Patriot
UAZ Patriot (2005-2022 / MK 1) This guide covers the main steps for performing a general check and routine maintenance on a UAZ Patriot. First, lift the vehicle and check the wear …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos