Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video we see how the variator of a scooter works, so how to transform the engine RPM into effective thrust. The main components are the movable pulley, the roller weights, and the belt. At low RPM the rollers are close to the axis (narrow pulley/short ratio), at high RPM the rollers move outwards (the pulley widens, and the ratio lengthens). It can break because the flat rollers no longer push, or the damaged belt slips. The springs of the modern variator are designed to start the scooter smoothly. The variator is never lubricated: graphite is sufficient and self-lubricating: oil attracts dust and kills the belt: the rollers must be checked frequently, and the belts must be of good quality.

Posted on 26 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Variator Rollers on a Scooter
Replacing Variator Rollers on a Scooter
(Various brands) Various In this video tutorial, you will see how to remove the rollers from the variator of a generic scooter. The procedure may vary from scooter to scooter…
How a variable valve timing system works
How a variable valve timing system works
(Various brands) Various Let’s see how a variable valve timing system works: its purpose is to change the timing of the valve openings. Since the cams are fixed, they cannot …
How to Remove the Variator and Drive Belt from a Sym Mio 50
How to Remove the Variator and Drive Belt from a Sym Mio 50
(Various brands) Various The instructions in this guide will allow you to remove and replace the drive belt and variator of the Sym Mio 50 scooter. First, place the scooter o…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos